Cisco Remote PHY Shelf 7200, Software Configuration Manual And Command Reference

Page: 77 / 116

Load for five secs: 7%/2%; one minute: 6%; five minutes: 6%
No time source, *12:41:44.228 CST Mon Mar 20 2017
LocTunID RemTunID Remote Device State Remote Address Sessn L2TP Class
Count
3388764998 1054297851 0004.9f03.0214 est 10.10.10.11 29 rphy-l2tp-gl...
Table 18: show cable rpd depi Field Descriptions
Description Field
Local session ID. LocID
Remote session ID. RemID
US means UEPI session, DS means DEPI session. This string means UEPI session on line
card slot 1, controller 0, rf-channel 2. US1/0/0:2(R)
Established state. est in State
On primary line card. P in Type
Troubleshooting Tips
Refer to the following troubleshooting tips if configuration errors occur.
If you configure DS controller profile and cable RPD, you can check the controller status, regardless of the
status of the RPD. If the channel's state is DOWN, use verbose option to view the reason.
Router#show controllers downstream-Cable 6/0/1 rf-channel 20 <verbose>
Chan State Admin Frequency Type
Annex Mod srate Interleaver dcid output
20 UP UP 231000000 VIDEO-SYNC B 256 5361 I128-J1 - NORMAL
Configuration Examples
This section provides example configurations for the R-PHY Controller Profile.
Example: Controller Profile Configuration
Upstream Controller Profile Configuration
configure terminal
cable upstream controller-profile 2
cable def-phy-burst 0
us-channel 0 chan-class-id 0
us-channel 0 channel-width 1600000 1600000
us-channel 0 docsis-mode atdma
us-channel 0 equalization-coefficient
us-channel 0 frequency 50000000
us-channel 0 hop-priority frequency modulation channel-width
us-channel 0 ingress-noise-cancellation 100
us-channel 0 maintain-psd
us-channel 0 max-logical-chans 1
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
65
Cisco Remote PHY Shelf 7200 Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Troubleshooting Tips