PA-100VG AnyLAN Port Adapter Installation and Configuration
27
Installing or Replacing a Port Adapter in Cisco 7200 Series Routers
Caution
Do not slide the port adapter all the way into the slot until you have connected all required cables.
Trying to do so will disrupt normal operation of the router.
Step 5
With the port adapter halfway in the slot, connect all required cables to the port adapter.
Step 6
After connecting all required port adapter cables, carefully slide the port adapter all the
way into the slot until you feel the port adapter’s connectors mate with the midplane.
Step 7
Move the port adapter lever to the locked position. Figure 17 shows the port adapter lever
in the locked position.
Note
If the port adapter lever does not move to the locked position, the port adapter is
not completely seated in the midplane. Carefully pull the port adapter halfway out of the
slot, reinsert it, and move the port adapter lever to the locked position.
Figure 17
Placing the Port Adapter Lever in the Locked Position (Cisco 7206 Shown)
This completes the procedure for installing a new port adapter in a Cisco 7200 series router.
ETHERNET 10BT
ENABLED
0
2
1
3
LINK
0
1
2
3
FAST SERIAL
EN
TD
TC
RD
RC
LB CD
TD
TC
RD
RC
LB CD
TD
TC
RD
RC
LB CD
TD
TC
RD
RC
LB CD
ENABLED
M
II
L
IN
K
R
J4
5
FAST ETHERNET
0
TOKEN RING
0
1
2
3
0
2
4
1
3
5
6
H6747
MII
EN
RJ45
EN
RJ45
LINK
1O PWR
OK
R
J-
45
C
P
U
R
E
S
E
T
FAST ETHERNET INPUT/OUTPUT CONTROLLER
ENABLED
PCMCIA
EJECT
SLOT 0
SLOT 1
FE MII
Port adapter
handle
Port adapter
lever (locked
position)
Note: This adapter installation
applies to any port or service
adapter.
