Cisco ONS 15454, Procedure Manual, Page: 77 / 175

Contents
lxxvii
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
78-19286-01
DLP- G527 Modify the CD Value of the TDC-CC and TDC-FC cards When Connected to OPT-RAMP-C and
OPT-RAMP-CE Amplifiers
14-33
DLP- G248 Use the Reinitialization Tool to Clear the Database and Upload Software (Windows)
15-6
DLP- G249 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX)
15-8
DLP- G298 View IS-IS Routing Information Base
15-10
DLP- G299 View ES-IS Routing Information Base
15-11
DLP- G300 Manage the TARP Data Cache
15-12
DLP- G250 Reset the TCC2/TCC2P/TCC3/TNC/TSC Card
15-13
DLP- G251 Reset DWDM Cards Using CTC
15-14
DLP- G259 Manual or Force Switch the Node Timing Reference
15-18
DLP- G260 Clear a Manual or Force Switch on a Node Timing Reference
15-19
DLP- G261 Clean Multi Fiber-Optic Cable Connectors
15-31
DLP- G262 Clean Fiber Connectors with CLETOP
15-32
DLP- G263 Clean the Fiber Adapters
15-32
DLP- G517 Create an Ingress Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE cards Using PCLI
B-4
DLP- G518 Create a Egress Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-5
DLP- G519 Create a Service Instance Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-7
DLP- G520 Apply an Ingress Policy to a Port on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-8
DLP- G521 Apply an Egress Policy to a Port on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-9
DLP- G522 Apply a Service Instance Policy to a Port on GE_XPE or 10GE_XPE Cards Using PCLI
B-9
DLP- G619 Create a Channel Group on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-24
DLP- G620 Add Ports to a Channel Group on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
PCLI
B-25
DLP- G643 Enable EFM on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-26
DLP- G644 Configure the EFM Mode on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-27
DLP- G635 Enable CFM on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-29
DLP- G636 Create a Maintenance Domain on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
PCLI
B-29
DLP- G637 Create a Maintenance Intermediate Point on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
Using PCLI
B-30
DLP- G638 Create a Maintenance End Point on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
PCLI
B-31
DLP- G649 Create a Segment on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-33
DLP- G650 Configure STCN on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
B-34
DLP- G651 Configure Preemption Delay on the Primary Edge Port Using PCLI
B-35
DLP- G652 Configure VLAN Load Balancing on the Primary Edge Port Using PCLI
B-35