Cisco ONS 15454, Procedure Manual, Page: 37 / 175

Figures
xxxvii
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
78-19286-01
Figure 5-13 Using the Patch Panel Latches to Slide the Patch Panel Away from the Tray
5-81
Figure 5-14 MPO Cable
5-82
Figure 5-15 Rear View of the Patch Panel
5-83
Figure 5-16 Top View of the Patch Panel Bar
5-83
Figure 5-17 Front View of the Patch Panel
5-84
Figure 5-18 Deep Patch Panel Tray
5-86
Figure 5-19 Deep Patch Panel Port Wavelengths
5-87
Figure 5-20 40-Channel Patch Panel Tray, Side View
5-88
Figure 5-21 40-Channel Patch Panel Tray, Top View
5-89
Figure 5-22 40-Channel (15454-PP-80) Patch Panel Port Wavelengths
5-91
Figure 5-23 Managing Cables on the Front Panel
5-100
Figure 5-24 Fiber-Storage Tray
5-101
Figure 5-25 Y-Cable Protection Port Label
5-105
Figure 5-26 Y-Cable Protection Module Tray
5-106
Figure 7-1 Single-Span Topology
7-11
Figure 7-2 Point-to-Point Topology
7-12
Figure 7-3 Hubs with No Line Amplifiers
7-12
Figure 7-4 Hubs with Line Amplifiers
7-13
Figure 8-1 Network View of Nodes (Terminal or ROADM)
8-6
Figure 8-2 Installing the Raman Pump on a Single Span
8-7
Figure 8-3 Installing the Raman Pump on Multiple Spans
8-7
Figure 8-4 Selecting Spans for Raman Amplification
8-8
Figure 8-5 Setting Raman Calibration Parameter
8-9
Figure 8-6 Bidirectional Path Is Unchecked and MUX/DMUX Present Is Checked
8-11
Figure 8-7 Bidirectional Path Is Unchecked and MUX/DMUX Present Is Unchecked
8-12
Figure 8-8 Bidirectional Path Is Checked and MUX/DMUX Present Is Checked
8-13
Figure 8-9 Bidirectional Path Is Checked and MUX/DMUX Present Is Unchecked
8-14
Figure 8-10 Calibrating Raman Amplification
8-15
Figure 8-11 Calibrating Raman Amplification
8-16
Figure 8-12 Raman Amplification Results
8-17
Figure 8-13 Force Raman Calibration
8-19
Figure 9-1 Upgrade OCHNC Initialization—Completed
9-39
Figure 9-2 Upgrade OCHNC Initialization—Failed
9-40
Figure 9-3 Viewing the Provisionable Patchcords Table
9-41
Figure 9-4 Automatically Routing a VCAT Circuit
9-73