Cisco EtherSwitch Service Modules Feature Guide
Upgrading the Cisco EtherSwitch Service Module Software
64
Cisco IOS Release 12.2(25)SEC
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interfac
e
switch
/
slot/port
4.
no switchport
5.
ip address
ip address/subnet mask
6.
no shutdown
7.
end
8.
show flash
9.
copy tftp: flash:
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Switch> enable
Enters privileged EXEC mode.
Step 2
configure terminal
Example:
Switch# configure terminal
Enters global configuration mode.
Step 3
interface
switch/slot/port
Example:
Switch(config)# interface fastethernet 1/0/24
Enter interface configuration mode and places you at the
Fast Ethernet 1/0/24 interface.
Step 4
no switchport
Example:
Switch(config-if)# no switchport
Enables the routed port.
Step 5
ip address
ip address/subnet mask
Example:
Switch(config-if)# ip address 172.16.1.100
255.255.255.0
Sets a primary or secondary IP address for this interface.
Step 6
no shutdown
Example:
Switch(config-if)# no shutdown
Enables the port that is connected to the TFTP server.
Step 7
end
Example:
Switch(config)# end
Switch#
Exits interface configuration mode, and returns to
privileged EXEC mode.
