© 2014 Cisco | IBM. All rights reserved.
Page 22
Figure 8 shows the ports configured for FCoE and the drivers loaded.
Figure 8:
OneCommand FCoE Utility Showing Ports Configured for FCoE with Drivers Loaded
Configuring the Cisco Nexus 5000 Series and B22 for IBM for FCoE
This example assumes that a server in bay 2 is using connection blade bays 3 and 4 for FCoE connectivity.
1. Enable the FCoE feature on the Cisco Nexus switches:
N5548-Bottom #
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
feature fcoe
FC license checked out successfully
fc_plugin extracted successfully
FC plugin loaded successfully
FCoE manager enabled successfully
FC enabled on all modules successfully
Warning: Ensure class-fcoe is included in qos policy-maps of all types
N5548-Bottom (config)#
N5548-Top #
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
feature fcoe
FC license checked out successfully
fc_plugin extracted successfully
