© 2014 Cisco | IBM. All rights reserved.
Page 20
Note:
With EvPC when you configure a Port Channel from the Cisco Nexus 2000 Series to the server, do not include the
vpc x configuration under the Port Channel. vPC should be assigned automatically by the Cisco NX-OS Software. For
more information, see
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/layer2/6x/b_5500_Layer2_Config_602N12_cha
pter_0101.html
.
To verify that the vPC is formed, go to one of the Cisco Nexus switches to check the status of the server Port
Channel interface. The pair of Cisco Nexus switches is in a vPC configuration, so each has a single port in the
Port Channel. A check of the status of the Port Channel on each parent switch shows that channel group 201 is in
the “P - Up in port-channel” state on each switch. A check from the OneCommand utility will show that the status
is
“Active” for each link that is up in the Port Channel.
5548-Bottom#
show port-channel summary
Flags: D - Down P - Up in port-channel (members)
I - Individual H - Hot-standby (LACP only)
s - Suspended r - Module-removed
S - Switched R - Routed
U - Up (port-channel)
M - Not in use. Min-links not met
--------------------------------------------------------------------------------
Group Port- Type Protocol Member Ports
Channel
--------------------------------------------------------------------------------
20 Po20(SU) Eth NONE Eth1/9(P) Eth1/10(D)
191 Po191(SU) Eth NONE Eth1/17(P)
192 Po192(SU) Eth NONE Eth1/18(P)
193 Po193(SU) Eth NONE Eth1/19(P)
194 Po194(SD) Eth NONE Eth1/20(D)
201 Po201(SU) Eth NONE Eth191/1/1(P)
202 Po202(SU) Eth NONE Eth192/1/1(P)
5548-Bottom #
N5548-Top#
show port-channel summary
show port-channel summary
Flags: D - Down P - Up in port-channel (members)
I - Individual H - Hot-standby (LACP only)
s - Suspended r - Module-removed
S - Switched R - Routed
U - Up (port-channel)
M - Not in use. Min-links not met
--------------------------------------------------------------------------------
