Receiving hole on each side of the chassis for the
chassis stops on the bottom-support rails.
3
Slide the power-supply end of the chassis onto the
bottom-support rails so that the chassis locks onto the
chassis stops at the end of the rails.
1
Customer-supplied rack-mount screw (M6 x 10 mm
screw or other screw appropriate for the rack) used
to secure each side of the chassis to the rack.
4
Chassis stops for holding the chassis (positioned by
the aisle required for the fan and power supply
modules).
2
Step 2
Use a customer-supplied rack-mount screw (an M6 x 10 mm screw or other appropriate screw for the rack) to attach
each of the two mounting brackets on the chassis to the rack and tighten each screw to the appropriate torque setting for
the screw (for M6 x 10 mm screws, use 40 in-lbs [4.5 N·m] of torque).
Cisco Nexus 9396PX NX-OS Mode Switch Hardware Installation Guide
26
Installing the Chassis
Installing the Chassis in a Four-Post Rack
