![background image](http://html.mh-extra.com/html/cisco/nexus-7000-series/nexus-7000-series_installation-manual_65136001.webp)
Installation
•
Power On and Initial Setup, page 1
•
Customize Hypervisor for Remote Access, page 3
•
Access and Configure Hypervisor, page 7
•
Using Predeployed Virtual Machines, page 12
•
Deploy New Virtual Machines , page 12
•
Install Applications on Virtual Machines, page 13
Power On and Initial Setup
Procedure
Step 1
Verify that the monitor and keyboard are connected as described in the
Quick Start Guide
.
Step 2
Power on the monitor.
Step 3
Verify that power is connected and the Power LED status, as shown in
Figure 1: Power and LED Status -
BE7000M Server, on page 1
and
Figure 2: Power and LED Status - BE7000H Server, on page 2
.
Figure 1: Power and LED Status - BE7000M Server
If the status of the Power LED is orange, that indicates server is off. If it is not, check the electrical and network
connections. If the status of the Power LED is green, skip forward to step 5.
Cisco Business Edition 7000 Installation Guide, Release 11.6
1