Cisco Nexus 3400-S, Hardware Installation Manual

Page: 15 / 62

C H A P T E R
3
Installing the Chassis
• Safety, on page 7
• Preparing to Install the Chassis, on page 8
• Unpacking and Inspecting the Chassis, on page 9
• Installing a 4 (RU) Chassis in a Four-Post Rack, on page 10
• Grounding the Chassis, on page 14
• Starting the Switch, on page 16
Safety
Before you install, operate, or service the switch, see the Regulatory, Compliance, and Safety Information for
the Cisco Nexus 3000 and 9000 Series for important Safety Information.
Statement 1071— Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Statement 1017—
Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed by
skilled, instructed or qualified personnel.
Warning
Statement 1030—
Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Cisco Nexus 3400-S Hardware Installation Guide
7