Installing the Chassis in the Rack
Ensure adequate air flow when mounting the chassis in a rack. For more information, see the
Air Flow
Guidelines
section.
Note
Install the cable guides before installing the Cisco NCS 4201 on the rack. See
Attaching the Cable Guides
section.
Note
To install the chassis in the equipment rack, perform these steps:
Step 1
Position the chassis in the rack as follows:
•
If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between the mounting
posts.
•
If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting posts.
Step 2
Align the mounting holes in the bracket with the mounting holes in the equipment rack.
Cisco NCS 4201 Hardware Installation Guide
3
Installing the Cisco NCS 4201
Installing the Chassis in the Rack
