Cisco NCS 1004, Hardware Installation Manual, Page: 7 / 70

C H A P T E R
2
Safety Guidelines
Before you perform any procedure in this publication, you must review the safety guidelines in this section
to avoid injuring yourself or damaging the equipment. Note that this section contains
guidelines , and does
not include every potentially hazardous situation. During any installation procedure, always use caution and
common sense.
Review the complete list of safety warnings available at Regulatory Compliance and Safety Information for
Cisco NCS 1004 Series .
• Standard Warning Statements, on page 5
• General Safety Guidelines for Personal Safety and Equipment Protection, on page 6
• Safety Precaution for Module Installation and Removal, on page 6
• Safety with Electricity, on page 7
• Power Connection Guidelines , on page 7
• Safety Precaution for Energy Hazard, on page 8
• Safety Precaution for Laser Radiation, on page 8
• Prevent Electrostatic Discharge Damage , on page 9
Standard Warning Statements
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only by using a special tool, lock and key, or other means of security.
Statement 1017
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals
are not in service. Be sure uninsulated conductors are not accessible when cover is in place.
Statement
1086
Warning
Hardware Installation Guide for Cisco NCS 1004
5