2-12
Installation Guide for the Cisco MGC Node Manager 2.5(2)
OL-4062-02
Chapter 2 Installing Cisco MGC Node Manager
Performing a New Installation of the Cisco MGC Node Manager
CSCOcmnm Element Manager Versions
Patch Build Build
Name Version Level Num Type
------------------------------------
hostEMm 2.5
00 071404 REL
mgcEMm 2.5
00 071404 REL
------------------------------------
Note
Specific information displayed from running this script varies according to the cmnm release and patch
you are using.
Note
If you suspect problems in installation, check the installation log file (which by default is
/var/tmp/installCSCOcmnm.log) to determine specifics.
Verifying the Installation of CiscoView 5.4
Verify the installation of CiscoView 5.4 by entering the following command:
./cmnmupdateCVip -s
•
If the package is installed, you see the following:
Current Ciscoview IP Address: 10.10.10.10
where 10.10.10.10 is the server IP address.
•
If the package is not installed, you see the following:
ERROR: information for “CSCOcmcv” was not found
CiscoView is designed to work with CiscoWorks 2000. When installing CiscoView packages outside this
environment, certain functions are not supported. The following CiscoView buttons do not work in the
Cisco MGC Node Manager environment:
•
Telnet
•
CCO connection
•
Preferences
•
About
•
Help
Table 2-3
Element Managers
mgcEM
Common Element Manager for Cisco MGC node devices
hostEM
Element Manager for Cisco MGC host signaling, trunking, and
dial plan components
