Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described
below, from left to right.
Front Panel Components
Item
Function
LED Status
Meaning
1
Power
Solid orange
Switch is unable to connect to the Meraki cloud
Flashing white
Firmware upgrade in process
Solid white
Switch is fully operational and connected to the Meraki cloud
Off
Switch does not have power
2
Restore
N/A
Restore button to clear switch IP and local configuration settings
3
Switch Ports
Off
No link is detected on this port
Solid orange
10/100 Mbps (1 Gbps on SFP+)
Solid green
1 Gbps (10 Gbps on SFP+)
In addition, there is a RESTORE button available on the front panel.
Insert a paperclip if a restore is required.
•
A brief, momentary press: To delete a downloaded configuration and reboot.
•
Press and hold for more than 10 sec: To force the unit into a full factory restore.
Back Panel Components
Item
Function
LED Status
Meaning
1
Management Interface
Green
Connected, used for easy access to the local status page
2
Stack Ports
Green
QSFP stacking cable is connected
3
