770-W AC power supply (PSU 1)
Redundant as 1 + 1
8
CIMC interface (Disabled in M5)
7
770-W AC power supply (PSU 1)
Redundant as 1 + 1
9
Step 2
Connect a second Cisco-supported SFP+ transceiver and cable to the SFP port to the right of the eth0 port in Step 1. This
is eth1 used to access the console and allows your Threat Grid M5 to monitor traffic.
Step 3
Use the supported power cords to connect the power supplies of the chassis to your power source. For more information
about supported power cords, see
Power Cord Specifications, on page 12
Step 4
Connect a keyboard to one of the USB ports and a monitor to the VGA port.
Step 5
Power on the appliance and wait for it to boot up.
Step 6
The TGSH Dialog is displayed on the console when the server has successfully booted up and connected. Complete the
Initial Configuration Steps as described in the
.
Cisco Threat Grid M5 Hardware Installation Guide
32
Rack-Mount the Chassis
Connect Cables, Turn on Power, and Verify Connectivity
