![Cisco M170 Quick Start Manual Download Page 8](http://html.mh-extra.com/html/cisco/m170/m170_quick-start-manual_63935008.webp)
8
7
Temporarily Change Your IP
Address
To connect to the Cisco M170, you must temporarily change the
IP address of your computer.
Note
Make a note of your current IP configuration settings
as you will need to revert to these settings after you
finish the configuration.
For Windows
Step 1
Go to the Start menu and choose
Control Panel
.
Step 2
Double-click
Network and Sharing Center
.
Step 3
Click
Local Area Connection
and then click
Properties
.
Step 4
Select
Internet Protocol (TCP/IP)
and then click
Properties
.
Step 5
Select
Use the Following IP Address
.
Step 6
Enter the following changes:
•
IP Address:
192.168.42.43
•
Subnet Mask:
255.255.255.0
•
Default Gateway:
192.168.42.1
Step 7
Click
OK
and
Close
to exit the dialog box.
For Mac
Step 1
Launch the Apple menu and choose
System Preferences
.
Step 2
Click
Network.
Step 3
Select the network configuration with the green icon.
This is your active connection. Then click
Advanced
.
Step 4
Click the TCP/IP tab and from Ethernet settings,
choose
Manually
from the drop-down list.
Step 5
Enter the following changes:
M170_QSG.fm Page 8 Wednesday, March 13, 2013 10:01 PM