11
Step 2
Enter the following login information:
•
Username:
admin
•
Password:
ironport
Note
The hostname parameter is assigned during system
setup. Before you can connect to the management
interface using a hostname (http://hostname:8080), you
must add the appliance
hostname
and IP address to
your DNS server database.
Step 3
Click
Login
.
Command-Line Interface
Step 1
For command-line interface access via the serial port
(see the
“Connect to the Appliance” section on page 9
),
access the command-line interface terminal emulator
using 9600 bits, 8 bits, no parity, 1 stop bit (
9600, 8,
N, 1
) and flow control set to Hardware.
Step 2
Initiate a session to the IP address
192.168.42.42
.
Step 3
Log in as
admin
with the password
ironport
.
Step 4
At the prompt, run the
systemsetup
command.
303360
M170_QSG.fm Page 11 Wednesday, March 13, 2013 10:01 PM
