7
Chapter 4: Setting up the Wireless A/G USB Network Adapter
Using the Setup Wizard
Wireless A/G USB Network Adapter
Chapter 4: Setting up the Wireless A/G USB Network Adapter
The Wireless A/G USB Network Adapter Setup Wizard will guide you through the installation procedure. The Setup
Wizard will install the driver and Wireless Network Monitor, as well as configure the Adapter.
Using the Setup Wizard
Insert the
Setup Wizard CD-ROM
into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome
screen should appear. If it does not, click the
Start
button and choose
Run
. In the field that appears,
enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
On the
Welcome
screen, you have the following choices:
Install
- Click the
Install
button to begin the software installation process.
User Guide
- Click the
User Guide
button to open the PDF file of this User Guide.
Exit
- Click the
Exit
button to exit the Setup Wizard.
1. To install the Adapter, click the
Install
button on the
Welcome
screen.
2. After reading the License Agreement, click the
Next
button if you agree, or click the
Cancel
button to end the
installation.
Figure 4-1: Setup Wizard’s Welcome Screen
NOTE:
You must run the Setup Wizard before connecting the Adapter
to your computer.
Figure 4-2: Setup Wizard’s License Agreement
