71
Appendix C: Configuring IPSec between a Windows 2000 PC and the Router
How to Establish a Secure IPSec Tunnel
Wireless-G VPN Boradband Router
How to Establish a Secure IPSec Tunnel
Step 1: Create an IPSec Policy
1. Click the
Start
button, select
Run
, and type
secpol.msc
in the
Open
field. The Local Security Setting screen
will appear as shown in Figure C-1.
2. Right-click
IP Security Policies on Local Computer
, and click
Create IP Security Policy
.
3. Click the
Next
button, and then enter a name for your policy (for example, to_router). Then, click
Next
.
4. Deselect the Activate the default response rule check box, and then click the
Next
button.
5. Click the
Finish
button, making sure the Edit check box is checked.
Step 2: Build Filter Lists
Filter List 1: win->router
1. In the new policy’s properties screen, verify that the Rules tab is selected, as shown in Figure C-2. Deselect
the
Use Add Wizard
check box, and click the
Add
button to create a new rule.
2. Make sure the IP Filter List tab is selected, and click the
Add
button. (See Figure C-3.)
NOTE:
The references in this section to “win” are
references to Windows 2000 and XP.
Figure C-1: Password Screen
Figure C-2: Setup Tab
Figure C-3: IP Filter List Tab
