Cisco Linksys WRT600N User Manual Download Page 30

Page: 30 / 99

Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Wireless Tab - Basic Wireless Settings

Dual-Band Wireless-N Gigabit Router with Storage Link

(use any of the characters on the keyboard). Make sure this setting is the same for all points in your wireless
network. For added security, you should change the default SSID (

linksys

) to a unique name.

Radio Band

. For best performance in a network using Wireless-N (2.4GHz), Wireless-G and Wireless-B devices,

keep the default, Auto, and the Wide Channel and Standard Channel will be selected automatically.

Wide Channel

. If you selected Wide - 40MHz Channel for the Radio Band setting, then this setting will be

available for your primary Wireless-N (2.4GHz) channel. Select any channel from the drop-down menu.

Standard Channel

. Select the channel for Wireless-N (2.4 GHz), Wireless-G, and Wireless-B networking. If you

selected Wide – 40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary
channel for Wireless-N (2.4GHz).

SSID Broadcast

. When wireless clients survey the local area for wireless networks to associate with, they will

detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting,

Enabled

. If you

do not want to broadcast the Router's SSID, then select

Disabled

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. For more information, click

Help

Summary of Contents for Linksys WRT600N




































































































Search results

Summary of Contents for Linksys WRT600N

Reviews:

Related manuals for Linksys WRT600N

Brands by name

Popular brands

Cisco Linksys WRT600N, User Manual

Search results

Summary of Contents for Linksys WRT600N

Reviews:

Related manuals for Linksys WRT600N

Brands by name

Popular brands