10
Installation
Subnet Mask
Enter the Subnet Mask, which must match the subnet mask
of the other devices on your network. The default is
255.255.255.0
.
Gateway
If you have a router on your network, enter its IP address. The
default is
192.168.1.1
.
Click
Next
.
Select the appropriate
configuration for your drive usage:
WARNING:
Before you format
drive(s), back up pre-existing
data because all data on your
drive(s) will be erased when
they are formatted.
NOTE:
If you need more
information, click
Help
.
Maximum Storage - Two separate disks (Recommended)
Drives seen
separately.
Maximum Storage - Two disks configured as one large disk
(JBOD/LVM)
Drives seen as a single virtual drive.
Maximum Data Security - Mirroring (RAID 1)
Requires two hard drives.
Maximum Speed - Striping (RAID 0)
Requires two hard drives.
Click
Next
.
P.
Select Drive Configuration
Select Drive Configuration
Summary of Contents for Linksys NAS200
Page 75: ...www linksys com ...
