Cisco Linksys EA2700, User Manual

Page: 140 / 591

12
Troubleshooting Linksys EA-Series
Your Internet cable is not plugged in
message
If you get a “Your Internet cable is not plugged in” message when trying to set
up your router, follow these troubleshooting steps
To fix the problem:
1. Make sure that an Ethernet or Internet cable (or a cable like the one
supplied with your router) is securely connected to the yellow
Internet
port on the back of the router and to the appropriate port on your
modem This port on the modem is usually labeled
Ethernet , but may
be named Internet or WAn
Back view of router
Back view of cable modem
Back view of DSL modem
2.
Make sure that your modem is connected to power and is turned on If it
has a power switch, make sure that it is set to the
on
or
l
position
3. If your Internet service is cable, verify that the cable modem’s CABLE port
is connected to the coaxial cable provided by your ISP
Or , if your Internet service is DSL, make sure that the DSL phone line is
connected to the modem’s
DSL
port
4.
If your computer was previously connected to your modem with a USB
cable, disconnect the USB cable
5. Return to the Cisco Connect window and click next to try again If the
window has already been closed, run the Setup program again on the
router’s CD