Cisco Linksys E800, User Manual, Page: 5 / 46

2
Product overview
Linksys E800
Back view
Ethernet ports
Wi-Fi Protected Setup button
Internet port
Power port
•
Ethernet ports
—Connect Ethernet cables (also called network cables)
to these Fast Ethernet (10/100) ports, color coded blue, and to wired
Ethernet network devices on your network
•
Internet port —Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
•
Wi-Fi Protected Setup™ button
—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices
For more information, see “How to set up wireless security using Wi-Fi
Protected Setup” on page 43
•
Power indicator
—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
•
Power —Connect the included AC power adapter to this port
CAUTION
Use only the adapter that came with your router
Port activity indicator
Green network
activity indicator
Network and Internet port
•
Green activity indicator
—On Ethernet ports, stays on when a cable
connects the port to another Ethernet port On the Internet port, stays
on while connected to a modem On both port types, it flashes while
transferring data
Bottom view
•
Reset button
—Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility For
more information, see “How to restore factory defaults” on page 61
Wi-Fi Protected Setup indicator