Cisco ISB7000, Installation Manual

Page: 13 / 36

13
1 Wireless LED
2 Wi-Fi Protected Setup (WPS) button
3 Wi-Fi Protected Setup (WPS) LED
4 Ethernet LED
5 Power LED
Connecting the Wireless Access Point to the Wireless
Gateway
1. Connect the 12 VDC Power Supply
plug on the access point to the wall
power outlet. Use only the power
adapter provided with the product.
2. Connect the power plug to the power
receptacle on the wireless access point.
3. Connect one end of the RJ-45
Ethernet cable to the Ethernet port on
the wireless access point.
4. Connect the other end of the RJ-45
Ethernet cable to an available Ethernet
port on your wireless gateway.
T14853
1
2
4
3
5
T14854
12VDC
Reset
Ethernet
1
2
3
Note: This illustration may vary from the actual product.
1 Ethernet Port Connects the Wireless Access Point to a
wireless gateway
2 Reset Restores factory default settings when held
for more than 5 seconds
3 Power Connects device to the external 12 VDC
power supply
Note: This illustration may vary from the actual product.
T14961
Power Receptacle
12VDC
Reset
12VDC
Reset
Ethernet
RJ-45
Cable
To Wall Power Outlet
Wireless
Gateway
Ethernet Port
Pairing the Wireless Access Point and Set-Top
1. Press the OK button on the set-top.
2. Press the WPS button on the wireless access point.