10
Because the connections
for a high-defi nition (HD)
or standard-defi nition (SD)
TV are diff erent, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the benefi ts
of HDTV. Refer to the manual that came with your TV for more information.
See page 30
for more information on picture formats.
Make one of the following connections for your home network:
• If your home network uses coaxial cable, use the TO WALL connector on the
set-top.
See page 14
.
• If your home network uses twisted pair cable (phoneline wiring), use the TO
WALL connector on the set-top and an adapter that converts twisted pair to
coaxial.
See page 14
.
• If your home network uses Ethernet (CAT-5) cable, use the NETWORK
connector on the set-top.
See page 14
.
Connecting the Set-Top
To connect your set-top to your network and home entertainment devices, complete these steps.
Identify the additional consumer
electronic devices you will
connect to the set-top and TV.
See pages 18 through 26
and
refer to the owner’s manual for
the device.
Plug the set-top and the TV into an AC power source that is not controlled by a
switch.
Make the connections for your TV, VCR, and DVD recorder as follows:
• If you are using an HDTV,
see page 15
and the connection diagrams in this
manual.
• If you are using a standard-defi nition TV,
see page 16
and the connection
diagrams in this manual.
• If you want to record some programs on VCR tape or DVD,
see page 17
and the connection diagrams in this manual.
1
2
3
5
4
Home Theater
Other
DVD
VCR
9
16
4
3
or
Summary of Contents for ISB7000
Page 1: ...Cisco ISB7000 Series High Definition IP Set Tops Energy Star V3 Installation Manual ...
Page 2: ...2 ...
Page 35: ......
