10
Because the connections
for a high-defi nition (HD)
or standard-defi nition (SD)
TV are diff erent, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the benefi ts
of HDTV. Refer to the manual that came with your TV for more information.
See page 26
for more information on picture formats.
Make one of the following connections for your home network:
• If your home network uses coaxial cable, use the TO WALL connector on the
receiver.
See page 11
.
• If your home network uses twisted pair cable (phoneline wiring), use the TO
WALL connector on the receiver and an adapter that converts twisted pair to
coaxial.
See page 11
.
• If your home network uses Ethernet (CAT-5) cable, use the NETWORK
connector on the receiver.
See page 11
.
Connecting the Receiver
To connect your receiver to your network and home entertainment devices, complete these steps.
Identify the additional consumer
electronic devices you will
connect to the receiver and TV.
See pages 15 through 23
and
refer to the owner’s manual for
the device.
Plug the receiver and the TV into an AC power source that is not controlled by a
switch. For further instructions on completing your setup, refer to the
Feature
Guide
available from your service provider.
Make the connections for your TV, VCR, and DVD recorder as follows:
• If you are using an HDTV,
see page 12
and the connection diagrams in this
manual.
• If you are using a standard-defi nition TV,
see page 13
and the connection
diagrams in this manual.
• If you want to record some programs on VCR tape or DVD,
see page 14
and the connection diagrams in this manual.
1
2
3
5
4
Home Theater
Other
DVD
VCR
9
16
4
3
or
Summary of Contents for ISB7000
Page 2: ...2 ...
