Security Services
Configuring Application Control
Cisco ISA500 Series Integrated Security Appliances Administration Guide
264
7
NOTE:
By default, the table filter settings are hidden. You can click the
triangle next to
Hide Table Filter Settings
to display or hide the table filter
settings.
STEP 4
After you set the table filter settings, click
Refresh Table
to refresh the data in the
table. Only the applications that you specified are displayed in the table.
STEP 5
Specify the preventive action for a single application or for all applications in a
category:
•
To permit or block traffic for all applications in a category, click the
Edit
(pencil) icon in the
Configure
column for the category. For complete details,
see
Permitting or Blocking Traffic for all Applications in a Category,
•
If the action, schedule, or logging settings vary among the applications in a
category, you can configure the settings for each application in the category.
You must first choose
keep application-level settings
for the Action and
Logging options of the category, and then click the
Edit
(pencil) icon in the
Configure
column for the application. For complete details, see
or Blocking Traffic for an Application, page 265
STEP 6
Click
OK
to save your settings.
Permitting or Blocking Traffic for all Applications in a Category
This section describes how to configure the category default settings. The
category default settings are applied to all applications in a category.
STEP 1
Click the
Edit
(pencil) icon in the
Configure
column for a category.
The Policy Profile - Add/Edit window opens.
STEP 2
Specify the category default settings:
•
Category:
The name of the category.
•
Action:
Choose
Permit
to permit traffic, or choose
Deny
to block traffic. If
the action settings vary among the applications in the category, you must
first choose the
keep application-level settings
option, and then configure
the action for each application in the category. See
Traffic for an Application, page 265
.
