3
Product Documentation and Compliance Information for the Cisco ISA 3000 Industrial Security Appliance
78-100733-01B0
Equipment that You Supply
•
For power and alarm connections, use UL- and CSA-rated style 1007 or 1569 twisted-pair copper
appliance wiring material (AWM) wire
•
ESD-preventive cord and wrist strap.
•
Wire crimper for chassis grounding.
•
Wire for connecting the chassis to an earth ground.
•
Ethernet cables for connecting to the Gigabit Ethernet ports.
•
Ratcheting torque flathead screwdriver that exerts up to 15 in-lb (1.69 N-m) of pressure.
•
A number-2 Phillips screwdriver.
•
Wire-stripping tool
Installation Warning and Caution Statements
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004
Warning
Exposure to some chemicals could degrade the sealing properties of materials used in the sealed
relay device.
Statement 381
Warning
This product relies on the building’s installation for short-circuit (over-current) protection. Ensure
that the protective device is rated not greater than: 2 A
Statement 1005
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available.
Statement 1024
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
