Cisco IP/TV 3400 Series, User Manual

Page: 98 / 126

Chapter 3 Installing the IP/TV Server
Removing or Replacing an IP/TV Server
3-36
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Removing or Replacing an IP/TV Server
Warning Before working on a system that has an On/Off switch, turn OFF the power and
unplug the power cord.
Warning Ultimate disposal of this product should be handled according to all national
laws and regulations.
To remove an IP/TV Server from your network, power it down, disconnect the
power cords and network cables, and physically remove the chassis from the rack.
To replace an IP/TV Server, remove it from the network. Then install a new IP/TV
Server and configure it using the same configuration parameters (IP address, and
so forth) that you used for the removed IP/TV Server.