Chapter 3 Installing the IP/TV Server
Connecting Cables to Video Capture Cards
3-34
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Step 2
Connect the video capture card to the appropriate video source:
•
If you are using a composite video source, connect the connector marked
Composite to the video source device.
•
If you are using an S-video source, connect the connector marked S-video to
the video source device.
Step 3
Connect the audio cables from the video source device to the Line/Mic audio port
(labeled 3 in
Figure 3-25
) on the video capture card.
Optibase MovieMaker 200S Networker Video Capture Card
The Optibase MovieMaker 200S Networker video capture card has one audio and
one video capture channel.
The IP/TV Server accessory kit contains the following cables for connecting the
IP/TV Server to audio and video sources:
•
Video BNC connector cable
•
S-video mini-DIN cable
•
Mini-jack stereo audio cable
For more details on the contents of the IP/TV Server accessory kit, see the
“Server
Accessory Kits” section on page 1-24
. If any items are missing or damaged,
contact your place of purchase.
To connect the Optibase MovieMaker 200S Networker video capture card to
video and audio sources, follow these steps:
Step 1
Connect the video capture card to the appropriate video source device:
•
If you are using a composite video source, plug one end of the video BNC
connector cable into the V IN port (labeled 2 in
Figure 3-26
) on the video
capture card.
•
If you are using an S-video source, plug one end of the S-video mini-DIN
cable into the S-Video port (labeled 1 in
Figure 3-26
) in on the video
capture card.
Summary of Contents for IP/TV 3400 Series
Page 4: ......
Page 21: ...xxi Cisco IP TV 3400 Series Servers User Guide OL 4467 01 Preface Command Syntax Conventions ...
Page 112: ...Appendix B Sample Hosts File B 2 Cisco IP TV 3400 Series Servers User Guide OL 4467 01 ...
Page 126: ...Index IN 8 Cisco IP TV 3400 Series Servers User Guide OL 4467 01 ...
