Cisco IE 4000, Software Configuration Manual

Page: 649 / 1066

645
Configuring QoS
Displaying QoS Information
Switch(config)#
cpu traffic qos dscp dscp table-map dscp-to-dscp
Switch(config)# cpu traffic qos cos dscp table dscp-to-cos
Switch(config)# cpu traffic qos cos cos table cos-to-cos
Switch(config)#
cpu traffic qos qos-group 50
Class:
Switch(config)# class-map match-any cpu-traffic
Switch(config-cmap)# match qos-group 50
Switch(config-cmap)# exit
Switch(config)# class-map match-any user-video
Switch(config-cmap)# match cos 3
Switch(config-cmap)# exit
Switch(config)# class-map match-any user-voice
Switch(config-cmap)# match cos 5
Switch(config-cmap)# exit
Policy:
Switch(config)# policy-map output-policy
Switch(config-pmap)# class user-voice
Switch(config-pmap-c)# priority
Switch(config-pmap-c)# police cir 10000000
Switch(config-pmap-c)# exit
Switch(config-pmap)# class user-video
Switch(config-pmap-c)# bandwidth percent 40
Switch(config-pmap-c)# exit
Switch(config-pmap)# class cpu-traffic
Switch(config-pmap-c)# bandwidth percent 10
Switch(config-pmap-c)# exit
Switch(config-pmap)# class class-default
Switch(config-pmap-c)# bandwidth percent 30
Switch(config-pmap-c)# exit
Interface:
Switch(config)# interface fastethernet0/1
Switch(config-if)# service-policy output output-policy
Switch(config-pmap-c)# exit
Displaying QoS Information
To display QoS information, use one or more of the privileged EXEC commands in Table 57 on page 645 .
Table 57 Commands for Displaying Standard QoS Information
Command Purpose
show class-map [ class-map-name ] Display QoS class-map information for all class maps or the
specified class map.
show policer aggregate [ aggregate-policer-name ] Display information about all aggregate policers or the specified
aggregate policer.
show policy-map [ policy-map-name | interface
[ interface-id ] [ input | output ] [ class class-name ]]
Display QoS policy map information for the specified policy map
name, interface, input or output policy maps, or policy-map
class.