B-3
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
OL-12433-01
Appendix B Installing and Upgrading Internal Modules
Removing the Chassis Cover
Figure B-1
Removing the Cisco IAD2801 Chassis Screws
Step 3
Insert a flat-blade screwdriver between the chassis and chassis cover at the screwdriver pry points on the
bottom of the chassis, indicated in
. Rotate the screwdriver 90 degrees to disengage the
chassis cover from the chassis. It may be necessary to turn the unit upside down on a flat surface to
access the pry points.
Figure B-2
Screwdriver Pry Points
Step 4
Gently slide the chassis cover of the router
away from the bottom of the chassis, as shown in
103167
121070
1
1
