C H A P T E R
2-1
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
OL-12433-01
2
Preinstallation Requirements and Planning
This document describes site requirements and equipment needed to install your Cisco IAD2801. It
includes the following sections:
•
Safety Recommendations, page 2-1
•
General Site Requirements, page 2-3
•
Installation Checklist, page 2-4
•
•
Inspecting the Router, page 2-6
•
Required Tools and Equipment for Installation and Maintenance, page 2-6
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
If you remove the chassis cover, put it in a safe place.
•
Keep tools and chassis components away from walk areas.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
•
Wear safety glasses when working under conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Note
For safety information you must know before working on your Cisco router, see the
Cisco 3800 Series Integrated Services Routers Regulatory Compliance and Safety Information
document.
