Cisco Firepower 4100 Series Command Reference Manual Download

Page: 373 / 420

show validate-task

To check the status of a manually initiated image verification, use the

show validate-task

command.

show validate-task

[

detail

fsm

pack_version

]

Syntax Description

(Optional) Displays detailed package status information for all available
platform packages.

detail

(Optional) Lists the finite state machine validation status. The

expand

keyword

and the

pack_version

variable are also available.

fsm status

(Optional) Displays validation information for the specified package.

The

detail

keyword is also available with this option.

pack_version

Command Modes

Firmware mode

Command History

Modification

Release

Command added.

1.1(1)

Usage Guidelines

If you do not include a

pack_version

, the

show validate-task

command lists information for every firmware

image on the appliance.

You can use this command or the

show validation package

command to determine the desired package

version number.

Example

This example shows how to show validation history for a specific firmware package:

FP9300-A#

scope firmware

FP9300-A /firmware #

show validate-task 2.3(1.51)

Validate task:

Pack Name: fxos-k9-bundle-infra.2.3.1.51.SPA
Pack Version: 2.3(1.51)
Validation Time Stamp: Never
Validation State: None
Overall Status String:

Pack Name: fxos-k9-bundle-server.2.3.1.51.SPA
Pack Version: 2.3(1.51)
Validation Time Stamp: Never
Validation State: None
Overall Status String:

Pack Name: fxos-k9.2.3.1.51.SPA
Pack Version: 2.3(1.51)
Validation Time Stamp: 2017-10-25T16:53:30.914
Validation State: None
Overall Status String: Ok

Cisco Firepower 4100/9300 FXOS Command Reference

371

S Commands

show validate-task

Summary of Contents for Firepower 4100 Series





































































































































































































































































































































































































































Search results

Summary of Contents for Firepower 4100 Series

Reviews:

Related manuals for Firepower 4100 Series

Brands by name

Popular brands

Cisco Firepower 4100 Series, Command Reference Manual

Search results

Summary of Contents for Firepower 4100 Series

Reviews:

Related manuals for Firepower 4100 Series

Brands by name

Popular brands