Cisco Firepower 4100 Series Command Reference Manual Download

Page: 239 / 420

show (app-instance)

To display current application information, use the

show

command in app-instance mode.

show

[

app-attri

detail

event

expand

fault

fsm

heartbeat

hotfix

resource

]

Syntax Description

(Optional) Displays current application attributes.

app-attri

(Optional) Displays detailed information for the current application instance.

This keyword is also available with many of the other command options to
display detailed information about the specified option.

detail

(Optional) Displays event management information for the application.

event

(Optional) Displays expanded information for the current application instance.

This keyword is also available with many of the other command options to
display expanded information about the specified option.

expand

(Optional) Displays information about faults that have occurred in this
application instance. The following options are also available:

•

fault_ID

—Shows information for the specified fault.

•

cause

—Shows information for only the specified cause type.

•

detail

—Shows detailed fault information.

•

severity

—Shows information for only the specified severity level.

•

suppressed

—Lists suppressed faults. The

cause

detail

and

severity

keywords are available with this option.

fault

(Optional) Displays finite state machine information the current application,
according to the specified keyword:

•

status

—Displays FSM status information.

•

task

—Displays FSM task information.

fsm

{

status

task

}

(Optional) Displays information about the last-received heartbeat.

heartbeat

(Optional) Displays information about applied hotfixes. The following options
are also available with this keyword:

detail

expand

, and

version

which you

can use to display information for a specific hotfix.

hotfix

(Optional) Displays information about current resource allocations.

resource

Command Modes

Application instance (/ssa/slot/app-instance) mode

Cisco Firepower 4100/9300 FXOS Command Reference

237

S Commands

show (app-instance)

Summary of Contents for Firepower 4100 Series





































































































































































































































































































































































































































Search results

Summary of Contents for Firepower 4100 Series

Reviews:

Related manuals for Firepower 4100 Series

Brands by name

Popular brands

Cisco Firepower 4100 Series, Command Reference Manual

Search results

Summary of Contents for Firepower 4100 Series

Reviews:

Related manuals for Firepower 4100 Series

Brands by name

Popular brands