Cisco Firepower 2110 Hardware Installation Manual Download | Manualshive

Page: 33 / 62

background image

Statement 1024

—

Ground Conductor

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.

Warning

Statement 1028

—

More Than One Power Supply

This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.

Warning

Statement 1029

—

Blank Faceplates and Cover Panels

Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous
voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt
other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system
unless all cards, faceplates, front covers, and rear covers are in place.

Warning

Statement 1030

—

Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1040

—

Product Disposal

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

Statement 1073

—

No User-Serviceable Parts

No user-serviceable parts inside. Do not open.

Warning

Statement 1045

—

Short-circuit Protection

This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.

Warning

Statement 1074

—

Comply with Local and National Electrical Codes

Installation of the equipment must comply with local and national electrical codes.

Warning

Cisco Firepower 2100 Series Hardware Installation Guide

29

Installation Preparation

Installation Notes and Warnings

«
...
31
32
33
34
35
...
»

Summary of Contents for Firepower 2110































































Reviews:

No comments

Related manuals for Firepower 2110

Brand: McAfee Pages: 16

Brand: Fortinet Pages: 62

H3C SecPath F1800-A

Brand: H3C Pages: 30

Brand: H3C Pages: 41

Brand: H3C Pages: 46

Observer Gigastor GS-8P-384T

Brand: Viavi Pages: 8

Brand: Recon Pages: 2

Brand: Watchguard Pages: 24

Brand: H3C Pages: 59

SecPath F1000-AI-5 Series

Brand: H3C Pages: 70

Brand: NETGEAR Pages: 20

Brand: Barracuda Pages: 2

Brand: IOGear Pages: 1

EAGLE mGuard Series

Brand: Hirschmann Pages: 8

Brand: Hirschmann Pages: 36

EAGLE 20 Series

Brand: Hirschmann Pages: 40

Brand: Hirschmann Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands