Accessory Kit
1
Bezel
1
Table 2 Components for this Appliance (continued)
The following components are field replaceable:
■
Hard disks
■
PSUs
■
1 Gb and 10 Gb SFP modules
Caution:
To avoid compatibility issues, Cisco recommends that you only use the SFPs supplied with your unit. They
must be inserted in LAN 1 and LAN 2, which are the designated SFP ports. When inserting the SFPs into the unit, you
cannot mix the type of SFP. Either insert two 10 Gb fiber SFPs or two 1 Gb copper SFPs.
To begin a Return Material Authorization (RMA) go to
http://www.cisco.com/web/ordering/cs_info/or3/o32/Return_
a_Product/WebReturns/product_Online_web_returns.html
.
Related Documents
■
The
Cisco Expressway Administrator Guide
on the
Maintain and Operate Guides page
describes how to
maintain and operate the Cisco Expressway software.
■
The
Cisco Expressway Cluster Creation and Maintenance Deployment Guide
on the
Configuration Guides
page
describes how to create and maintain a cluster of Cisco Expressways.
Training
Training is available online and at our training locations. For more information on all the training we provide and where
our training offices are located, visit
www.cisco.com/go/telepresencetraining
Glossary
A glossary of TelePresence terms is available at:
https://tp-tools-web01.cisco.com/start/glossary/
6
Cisco Expressway CE1100 Appliance Installation Guide
Introduction