Cisco TelePresence System EX Series
Administrator Guide
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
111
Video Selfview
Determine if the main video source (self-view) shall be displayed on screen.
This setting is obsoleted by the Video SelfviewDefault mode setting.
Requires user role:
USEr
Value space:
<off/on>
Off:
Do not display self-view on screen.
On:
Display self-view on screen.
Example:
Video Selfview: On
Video SelfviewDefault Mode
Determine if the main video source (self-view) shall be displayed on screen after a call.
The position and size of the self-view window is determined by the Video SelfviewDefault
PIPPosition and the Video SelfviewDefault Fullscreenmode settings respectively.
Requires user role:
ADmIn
Value space:
<off/Current/on>
Off:
self-view is switched off when leaving a call.
Current:
self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it
was off during the call, it remains off after the call.
On:
self-view is switched on when leaving a call.
Example:
Video SelfviewDefault Mode: Current
Video SelfviewDefault FullscreenMode
Determine if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched on
(see the Video SelfviewDefault mode setting).
Requires user role:
ADmIn
Value space:
<off/Current/on>
Off:
self-view will be shown as a PiP.
Current:
The size of the self-view picture will be kept unchanged when leaving a call, i.e. if it
was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it
remains fullscreen after the call.
On:
The self-view picture will be shown in fullscreen.
Example:
Video SelfviewDefault FullscreenMode: Current
Video SelfviewDefault PIPPosition
Determine the position on screen of the small self-view picture-in-picture (PiP) after a call. The
setting only takes effect when self-view is switched on (see the Video SelfviewDefault mode
setting) and fullscreen view is switched off (see the Video SelfviewDefault Fullscreenmode
setting).
Requires user role:
ADmIn
Value space:
<Current/Upperleft/UpperCenter/Upperright/Centerleft/Centerright/lowerleft/
lowerright >
Current:
The position of the self-view PiP will be kept unchanged when leaving a call.
UpperLeft:
The self-view PiP will appear in the upper left corner of the screen.
UpperCenter:
The self-view PiP will appear in the upper center position.
UpperRight:
The self-view PiP will appear in the upper right corner of the screen.
CenterLeft:
The self-view PiP will appear in the center left position.
CentreRight:
The self-view PiP will appear in the center right position.
LowerLeft:
The self-view PiP will appear in the lower left corner of the screen.
LowerRight:
The self-view PiP will appear in the lower right corner of the screen.
Example:
Video SelfviewDefault PIPPosition: Current
Video SelfviewDefault OnMonitorRole
Determine which monitor/output to display the main video source (self-view) on after a call. The
value reflects the monitor roles set for the different outputs in the Video output HDmI/Internal
monitorrole settings.
The setting applies both when self-view is displayed in full screen, and when it is displayed as
picture-in-picture (PiP), but only if the Video monitors setting is set to Dual.
Requires user role:
ADmIn
Value space:
<First/Second/Current>
First:
The self-view picture will be shown on outputs with the Video output lCD/Internal
monitorrole set to First.
Second:
The self-view picture will be shown on outputs with the Video output lCD/Internal
monitorrole set to Second.
Current:
When leaving a call, the self-view picture will be kept on the same output as it was
during the call.
Example:
Video SelfviewDefault OnMonitorRole: Current