4
Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards
OL-24318-02
Configuring the EHWIC 1 GE-SFP-CU
LEDs
Table 1
lists
the LEDs and describes their functionality and different states. The LEDs provide a visual
indication of your available services.
Table 1
LED Indicators
Configuring the EHWIC 1 GE-SFP-CU
This section describes how to configure your EHWIC 1 GE-SFP-CU.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface
type slot/subslot/port number
4.
ip address
ip-address mask
5.
shutdown
6.
no shutdown
7.
exit
LED
Color
Description
SFP EN
Off
Not present.
Green
Present and enabled.
Amber
Present with failure.
ACT
Solid or blinking green
Blinks proportional to valid Ethernet traffic.
Off
No packet transfers are occurring.
LNK
Green
Solid green indicates the Ethernet port has a
link partner.
SPD
Off
No link.
Green
Note
Blink indicates port speed.
blinking
1 blink before pause—10 Mbps link speed.
2 blinks before pause—100 Mbps link speed.
3 blinks before pause—1000 Mbps link speed.
