background image

4028103 Rev A 

 

 

 

FCC Compliance

 

FCC Compliance 

United States FCC Compliance 

This device has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against such interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy. If not installed and used in accordance with the 
instructions, it may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment OFF and ON, the user is encouraged to try to correct the interference 
by one or more of the following measures: 

ƒ

 

Reorient or relocate the receiving antenna. 

ƒ

 

Increase the separation between the equipment and receiver. 

ƒ

 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

ƒ

 

Consult the service provider or an experienced radio/television technician for help. 

Any changes or modifications not expressly approved by Cisco Systems, Inc., could void the 
user's authority to operate the equipment. 

The information shown in the FCC Declaration of Conformity paragraph below is a 
requirement of the FCC and is intended to supply you with information regarding the FCC 
approval of this device. 

The phone numbers listed are for FCC-related questions only and not 

intended for questions regarding the connection or operation for this device. Please contact your 

service provider for any questions you may have regarding the operation or installation of this device. 

  Declaration of Conformity 

 

This device complies with Part 15 of FCC 
Rules. Operation is subject to the following two 
conditions: 1) the device may not cause 
harmful interference, and 2) the device must 
accept any interference received, including 
interference that may cause undesired 
operation. 

Data Cable Modem 

Model: DPQ2160/EPQ2160 

Manufactured by: 

Cisco Systems, Inc.  

5030 Sugarloaf Parkway  

Lawrenceville, Georgia 30044 USA 

Telephone: 770-236-1077 

Canada EMI Regulation 

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada. 

20081121 FCC Standard

 

 

Summary of Contents for DPQ2160

































Reviews: