Chapter 3 Operation of Front Panel Indicators
3
5
OL-29163-01 Rev A
Initial Power Up, Calibration, and Registration (AC
Power applied)
The following chart illustrates the sequence of steps and the corresponding
appearance of the residential gateway front panel LED status indicators during
power up, calibration, and registration on the network when AC power is applied to
the residential gateway. Use this chart to troubleshoot the power up, calibration, and
registration process of your residential gateway.
Note:
After the residential gateway completes Step 7 (Data Network Registration
Complete), the residential gateway proceeds immediately to Normal Operations. See
Normal Operations (AC Power applied)
(on page 38).
Front Panel LED Status Indicators During Initial Power Up, Calibration, and
Registration
Part 1, High Speed Data Registration
Step:
1
2 3 4
5 6
Front Panel
Indicator
Self
Test
Downstream
Scan
Downstream
Signal Lock
Ranging
Requesting IP
Address
Request High
Speed Data
Provisioning File
1
POWER
On
On On On
On On
2
US/DS
On
Blinking
On On
On On
3
ONLINE
On
Off Off Off
Off Blinking
4
2.4 GHz
On
On or Blinking On or Blinking On or
Blinking
On or Blinking On or Blinking
5
5G Hz
On
On or Blinking On or Blinking On or
Blinking
On or Blinking On or Blinking
6 TEL
1
On
Off Off Off
Off Off
7 TEL
2
On
Off Off Off
Off Off
8 BATTERY
On – When battery is charged
Blinks – When battery charge is low
Off – When there is no battery in the unit
