![background image](http://html.mh-extra.com/html/cisco/dpc2434/dpc2434_user-manual_64888068.webp)
68
4011350 Rev D
How Do I Configure the Wireless Home Gateway?
Field Name
Description
Domain
Name
Displays the domain name that is usually downloaded to your
gateway by your ISP. However, some ISPs require this
information to be entered manually. If manual entry is
required, your ISP will provide the information for you to
enter into this field.
Static IP
Address
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Note:
When setting a static IP address, you must enter the IP
address, subnet mask, and default gateway before the static IP
address will become operational.
Static IP Mask Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Default
Gateway
Manual entry is required, your ISP will provide the
information for you to enter into this field.
Primary DNS
(static IP
only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Secondary
DNS
(static IP
only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
MTU Size
Sets the size of the maximum transmission unit (MTU) for the
network interface. The default value is 0 (zero).
Important:
Do not change this value unless you are an
experienced user.
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key
Description
Renew WAN
IP Address
Lease
Forces a release and renewal of your WAN IP address
Apply
Saves the values you enter into the fields without closing the
screen