Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Product Specifications
Table 3.
Product Specifications
Specification
Value
PowerKEY Specifications
ECM Generation
Supports 1000 broadcast sessions at a 4- to 15-second cryptocycle
PowerKEY ECM/EMM
Handling
As per PowerKEY Book 1 Specifications
MSK/ISK Decryption Rate
Up to 10 per second (RSA 1024-bit private operation)
Maximum Session Set-Up
Rate
10 sessions/second
ECMG-to-SCS Interface
● Per DVB Simulcrypt specification (ETSI TS 103 197: Digital Video Broadcasting, Headend
implementation of DVB SimulCrypt)
● Multiple SCS connections allowed supporting distributed SCS and redundancy
● SCS IP address configurable using the DNCS
EIS to SCS Interface
Per DVS-278 specification (SCTE DVS/278: Head-end Implementation of OpenCAS)
PowerKEY Conditional
Access System
Secures digital services using symmetric encryption algorithm for content protection and strong
authentication and digital signature for entitlement delivery
Connector Specifications
Ports (Back Panel)
● Two 10/100/1000BASE-T network interfaces
● One Serial I/O port
● Two USB 2.0 ports
● One VGA video port
● One eSATA port
Electrical Specifications
Powering
100 VAC to 240 VAC 50/60 Hz
Power Consumption
250 W
Electrostatic Shock
No damage from five discharges of 15 KV IEC electrostatic discharge model [150 Pico-Farad
(pF) + 150 ohm] to all exposed connections
RFI/EMI Emission
● FCC part 15 sub part B class A
● EN50083-2
Environmental Specifications
Temperature Range
50º to 95ºF (10º to 35ºC)
Cooling
Self-contained fans provide sufficient cooling to operate in a 19-in. (483 mm) rack without the
need for a 1 RU spacer between units
Storage Temperature
40º to 149ºF (-40º to +65ºC)
Operating Humidity
20% to 80% non-condensing
Mechanical Specifications
Dimensions (WxHxD)
● One rack unit
● 17 in. x 1.68 in. x 15.5 in. (431 mm x 42.6 mm x 393.7 mm)
