DIMM fault LEDs (one behind each DIMM socket
on the motherboard)
These LEDs operate only when the server is in
standby power mode.
• Amber—DIMM has a fault.
• Off—DIMM is OK.
3
Fan module fault LEDs (one behind each fan
connector on the motherboard)
• Amber—Fan has a fault or is not fully seated.
• Green—Fan is OK.
1
-
CPU fault LEDs (one behind each CPU socket on
the motherboard).
These LEDs operate only when the server is in
standby power mode.
• Amber—CPU has a fault.
• Off—CPU is OK.
2
General Warnings, Regulatory and Safety
Conventions
Safety warnings appear throughout this guide in procedures that may harm you if performed incorrectly. A
warning symbol precedes each warning statement. Specific warnings are included in the sections to which
they apply.
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
Statement 1071 SAVE THESE
INSTRUCTIONS
Warning
Means reader be careful. In this situation, you might do something that could result in equipment damage or
loss of data.
Caution
Warnings
The warnings below are general warnings that are applicable to the entire guide. Specific warnings are included
in the sections to which they apply.
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Statement 1015
Warning
Cisco 3375 Appliance for Cisco Connected Mobile Experiences Installation Guide
8
Overview
General Warnings, Regulatory and Safety
