Chapter 3
Managing Cisco SIP IP Phones
Modifying the Phone’s SIP Settings
3-14
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
–
2—The Anonymous Call Blocking feature is disabled permanently and
cannot be turned on and off locally via the phone’s user interface. If
specifying this value, specify this parameter in the phone-specific
configuration file.
–
3—The Anonymous Call Blocking feature is enabled permanently and
cannot be turned on and off locally via the phone’s user interface. If
specifying this value, specify this parameter in the phone-specific
configuration file.
•
tftp_cfg_dir—(Required if phone-specific configuration files are located in a
subdirectory) Path to the TFTP subdirectory in which phone-specific
configuration files are stored.
•
network_media_type—(Optional) Ethernet port negotiation mode. Valid
values are:
–
Auto—Port is auto-negotiated.
–
Full100—Port is configured to be a full-duplex, 100MB connection.
–
Half100—Port is configured to be a half-duplex, 100MB connection.
–
Full10—Port is configured to be a full-duplex, 10MB connection.
–
Half10—Port is configured to be a half-duplex, 10MB connection.
The default is Auto.
•
autocomplete—(Optional) Whether to have numbers automatically
completed when dialing. Valid values are 0 (disable auto completion) or 1
(enable auto completion). The default is 1.
•
sync—Value against which to compare the value in the syncinfo.xml before
performing a remote reboot. Valid value is a character string up to 32
characters long.
•
time_format_24hr—Whether a 12 or 24-hour time format is displayed by
default on the phones’ user interface. Valid values are:
–
0—The 12-hour format is displayed by default but can be changed to a
24-hour format via the phone’s user interface.
–
1—The 24-hour format is displayed by default but can be changed to a
12-hour format via the phone’s user interface.
–
3—The 12-hour format is displayed and cannot be changed to a 24-hour
format via the phone’s user interface.
