Cisco Catalyst PON Series, Hardware Installation Manual

Page: 27 / 80

C H A P T E R
2
Installation
• Safety Warnings, on page 17
• Box Contents, on page 20
• Installation Guidelines, on page 22
• Installing an OLT, on page 22
• Installing an ONT, on page 30
• Installing Cisco Catalyst PON Manager, on page 35
Safety Warnings
This section includes the warning statements relating to the basic installation. We recommend that you read
this section before you start the installation procedure.
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.
Statement 43
Warning
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and
equipment damage.
Statement 48
Warning
To comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.87
inches (20 cm) or more from the body of all persons.
Statement 332
Warning
Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware
or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Statement 378
Warning
Cisco Catalyst PON Series Switches Hardware Installation Guide
17