• A slotted screwdriver or a wrench to tighten the screws on the hose clamps
• A Hex key to tighten set screws
Mounting on a Wall or Ceiling Using Articulating Bracket
Tether antenna assembly and mounting hardware to a secure mounting surface using the tether anchor on the
antenna. The mounting kit does not include the tether strap.
Note
Figure 18: Exploded View of Antenna and Bracket Hardware Assembly
Tightening Values
Quantity
Mounting Bracket Kit
Item
#
—
2
Mounting flange
1
—
1
Mounting arm
2
20.0 +/- 1.0 Nm
4
M8 x20 screws
3
25.0 +/- 1.0 Nm
2
M8 nut
4
5.5 Nm to 6 Nm
2
Hose clamp (mast/pole mount only)
5
3.0 Nm to 3.5 Nm
2
Set screws (mast/pole mount only)
6
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
14
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
Mounting on a Wall or Ceiling Using Articulating Bracket
