4
Catalyst 6000 Family Content Switching Module Installation and Configuration Note
78-11631-02 Rev. A0
Overview
Front Panel Description
The CSM front panel features are shown in
Figure 1
.
Figure 1
Content Switching Module Front Panel
Note
The RJ-45 connector is covered by a removable plate.
Status LED
When the CSM powers up, it initializes various hardware components and communicates with the
supervisor engine. The Status LED on the CSM shows the dialog with the supervisor engine and the
results of the initialization.
Note
For more information on the supervisor engine LEDs, refer to the
Catalyst 6000 Family Module
Installation Guide
.
During the normal initialization sequence, the status LED changes from Off to Red, Orange, and then
Green.
Table 2
describes the status LED operation.
Health Monitoring
TCP, HTTP, ICMP, Telnet, FTP
Other Features
SSL session ID, cookie and source IP address-based sticky
connections
Fragmented IP frames support
MTU
2
of 9000
Load and availability reporting supporting remote monitoring and
management
High availability preventing service disruptions
Redundant modules configured for fault-tolerance support
1.
SSL = Secure Socket Layer
2.
MTU = Maximum Transmission Unit
Table 1
Content Switching Module Features (continued)
Feature
Description
CSG
RJ-45 (Test)
connector
Status
LED
47525
