Cisco Catalyst 4124, Product Overview

Page: 8 / 18

Chapter 1 Product Overview
Switch Features
1-8
Catalyst 4000 Series Switch Installation Guide
78-6120-10
Table 1-2 describes the features of the Catalyst 4006 switch.
Table 1-2 Features of the Catalyst 4006 Switch
Feature Description
Ethernet speeds
•
Ethernet (10BASE-T) interface to workstations and repeaters
•
Fast Ethernet (100BASE-T) interface to workstations, servers, switches,
and routers
Note
Autonegotiation of link speed on each 10/100 port allows migration to
100BASE-T from a 10BASE-T installed base.
Standard equipment
•
Six-slot modular chassis with one slot reserved for a supervisor engine
and five slots for switching modules
•
Three power supply bays that support two required and one optional
redundant AC-input power supply
•
One hot-swappable fan assembly
Standard management
and support
•
Supports Layer 2 forwarding with an aggregate forwarding rate of
18 million pps
•
Supports 16,000 MAC addresses per system
•
Supports up to 1,024 VLANs with IEEE 802.1Q VLAN tagging on all
ports and support for VTP
1
• Supports port aggregation using PAgP
2
for 100-Mbps and 1000-Mbps
EtherChannel
Software management
•
CLI
3
and SNMP interfaces consistent with Catalyst 6500 series switches
•
Out-of-band management (SNMP, Telnet client, and TFTP) through the
10/100BASE-T management port on the supervisor engine
•
RMON
4
with RMON 1
• Standard Layer 2 features:
–
802.1D Spanning Tree Protocol
–
CDP
5
–
VTP version 2 with pruning extensions
–
CGMP
6
client