Converged Wired and Wireless Access
Identify Configuration Values
82
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
•
A Catalyst 3850 switch stack can support a maximum of 50 access points.
•
A Cisco Catalyst 3650 stack can support a maximum of 25 access points.
•
WLAN cannot use client VLAN 0.
Identify Configuration Values
We recommend that you identify certain switch configuration values in advance so that you are ready to
proceed with this section without interruption. As you follow the configuration sequence, replace the
values in column B with your values in column C.
Note
This workflow contains two separate IP subnets that contain VLANs used for access points and wireless
clients. The access points are on VLAN 12, and use IP subnet 192.168.12.x. The wireless clients are on
VLAN 200, and use IP subnet 192.168.13.x.
Note
In the configuration examples, you must replace the blue italicized example values with your own values.
Table 10
Wireless LAN Controller Values
A. Value Name
B. Example Value Names
C. Your Value
Number of access point count
licenses and slots
10/1, 15/2
Management VLAN
wireless-management-vlan
Management VLAN access point
and description
Wireless VLAN
Wireless Management VLAN
Interface
IP address for VLAN interface
managing access points
192.168.12.2 255.255.255.0
Access point pool
APVlan10-Pool
Access point client pool
192.168.12.0 255.255.255.0
Default router for client
10.1.1.1
excluded address
192.168.12.1
Wireless management interface
vlan12
Access interface
GigabitEthernet1/0/3
Description
Lightweight Access Point
WLAN interface for client
VLAN
200
WLAN profile and ID
Wireless_Client
Wireless client VLAN IP address
192.168.13.2 255.255.254.0
WLAN for easy-RADIUS and
ID
OPEN_WLAN 1 open_wlan
RADIUS server
AuthServer
